Description
• Additional detail in downloads tab below_x000D_
• Call us at 954-922-3800 to place your order
Thomson / Marathon 150A TS870SE Auto Transfer Switch 3 PH 600V Max 3 Pole NEMA 1 Encl
Model #: TS8730150B1CY5AMKAA
OUR PRICE: Call for Price
In stock
• Additional detail in downloads tab below_x000D_
• Call us at 954-922-3800 to place your order
Description
Downloads
Features
• Additional detail in downloads tab below_x000D_
• Call us at 954-922-3800 to place your order
Features
_x000D_
| Amperage Range: | 100A – 1200A |
| Voltage Range: | 208 – 600V |
| Poles: | 2, 3 or 4 |
| Frequency: | 50/60Hz |
| Power Distribution: | Single Phase, 3 wire or 3 Phase, 4 wire |
| Controller: | TSC 900 |
| Standard Enclosure: | Nema 1 |
| Safety Standard: | UL 1008 , CSA C22.2 No. 178 |
| Quality Assurance: | ISO 9001 Registered |
| Warranty: | 2 Year |
_x000D_
_x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_
- _x000D_
- fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.
- 3 cycle short circuit current withstand
- completely separate utility and generator side power switching units.
- power switching units can incorporate over current protection, allowing cost savings in upstream devices.
- not damaged if manually switched while in service.
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_
- _x000D_
- heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.
- safe manual operation permits operation under adverse conditions.
_x000D_
_x000D_
_x000D_
Superior Serviceability_x000D_
- _x000D_
- all mechanical and control devices are visible and readily accessible.
- all control wires and power busses are front-accessible.
_x000D_
_x000D_
_x000D_
Control Features_x000D_
- _x000D_
- TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation
- isolation plug permits disconnecting control circuits from all power sources.
_x000D_
_x000D_
_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_
- _x000D_
- IBC 2006 – Section 13, Occupancy Category IV
- ASCE7-05 Region 3 (minimum SS=342%)
_x000D_
_x000D_
_x000D_
Features
_x000D_
| Amperage Range: | 100A – 1200A |
| Voltage Range: | 208 – 600V |
| Poles: | 2, 3 or 4 |
| Frequency: | 50/60Hz |
| Power Distribution: | Single Phase, 3 wire or 3 Phase, 4 wire |
| Controller: | TSC 900 |
| Standard Enclosure: | Nema 1 |
| Safety Standard: | UL 1008 , CSA C22.2 No. 178 |
| Quality Assurance: | ISO 9001 Registered |
| Warranty: | 2 Year |
_x000D_
_x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_
- _x000D_
- fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.
- 3 cycle short circuit current withstand
- completely separate utility and generator side power switching units.
- power switching units can incorporate over current protection, allowing cost savings in upstream devices.
- not damaged if manually switched while in service.
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_
- _x000D_
- heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.
- safe manual operation permits operation under adverse conditions.
_x000D_
_x000D_
_x000D_
Superior Serviceability_x000D_
- _x000D_
- all mechanical and control devices are visible and readily accessible.
- all control wires and power busses are front-accessible.
_x000D_
_x000D_
_x000D_
Control Features_x000D_
- _x000D_
- TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation
- isolation plug permits disconnecting control circuits from all power sources.
_x000D_
_x000D_
_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_
- _x000D_
- IBC 2006 – Section 13, Occupancy Category IV
- ASCE7-05 Region 3 (minimum SS=342%)
_x000D_
_x000D_
_x000D_
Features
_x000D_
| Amperage Range: | 100A – 1200A |
| Voltage Range: | 208 – 600V |
| Poles: | 2, 3 or 4 |
| Frequency: | 50/60Hz |
| Power Distribution: | Single Phase, 3 wire or 3 Phase, 4 wire |
| Controller: | TSC 900 |
| Standard Enclosure: | Nema 1 |
| Safety Standard: | UL 1008 , CSA C22.2 No. 178 |
| Quality Assurance: | ISO 9001 Registered |
| Warranty: | 2 Year |
_x000D_
_x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_
- _x000D_
- fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.
- 3 cycle short circuit current withstand
- completely separate utility and generator side power switching units.
- power switching units can incorporate over current protection, allowing cost savings in upstream devices.
- not damaged if manually switched while in service.
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_
- _x000D_
- heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.
- safe manual operation permits operation under adverse conditions.
_x000D_
_x000D_
_x000D_
Superior Serviceability_x000D_
- _x000D_
- all mechanical and control devices are visible and readily accessible.
- all control wires and power busses are front-accessible.
_x000D_
_x000D_
_x000D_
Control Features_x000D_
- _x000D_
- TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation
- isolation plug permits disconnecting control circuits from all power sources.
_x000D_
_x000D_
_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_
- _x000D_
- IBC 2006 – Section 13, Occupancy Category IV
- ASCE7-05 Region 3 (minimum SS=342%)
_x000D_
_x000D_
_x000D_
Features
_x000D_
| Amperage Range: | 100A – 1200A |
| Voltage Range: | 208 – 600V |
| Poles: | 2, 3 or 4 |
| Frequency: | 50/60Hz |
| Power Distribution: | Single Phase, 3 wire or 3 Phase, 4 wire |
| Controller: | TSC 900 |
| Standard Enclosure: | Nema 1 |
| Safety Standard: | UL 1008 , CSA C22.2 No. 178 |
| Quality Assurance: | ISO 9001 Registered |
| Warranty: | 2 Year |
_x000D_
_x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_
- _x000D_
- fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.
- 3 cycle short circuit current withstand
- completely separate utility and generator side power switching units.
- power switching units can incorporate over current protection, allowing cost savings in upstream devices.
- not damaged if manually switched while in service.
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_
- _x000D_
- heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.
- safe manual operation permits operation under adverse conditions.
_x000D_
_x000D_
_x000D_
Superior Serviceability_x000D_
- _x000D_
- all mechanical and control devices are visible and readily accessible.
- all control wires and power busses are front-accessible.
_x000D_
_x000D_
_x000D_
Control Features_x000D_
- _x000D_
- TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation
- isolation plug permits disconnecting control circuits from all power sources.
_x000D_
_x000D_
_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_
- _x000D_
- IBC 2006 – Section 13, Occupancy Category IV
- ASCE7-05 Region 3 (minimum SS=342%)
_x000D_
_x000D_
_x000D_
Features
_x000D_
| Amperage Range: | 100A – 1200A |
| Voltage Range: | 208 – 600V |
| Poles: | 2, 3 or 4 |
| Frequency: | 50/60Hz |
| Power Distribution: | Single Phase, 3 wire or 3 Phase, 4 wire |
| Controller: | TSC 900 |
| Standard Enclosure: | Nema 1 |
| Safety Standard: | UL 1008 , CSA C22.2 No. 178 |
| Quality Assurance: | ISO 9001 Registered |
| Warranty: | 2 Year |
_x000D_
_x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_
- _x000D_
- fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.
- 3 cycle short circuit current withstand
- completely separate utility and generator side power switching units.
- power switching units can incorporate over current protection, allowing cost savings in upstream devices.
- not damaged if manually switched while in service.
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_
- _x000D_
- heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.
- safe manual operation permits operation under adverse conditions.
_x000D_
_x000D_
_x000D_
Superior Serviceability_x000D_
- _x000D_
- all mechanical and control devices are visible and readily accessible.
- all control wires and power busses are front-accessible.
_x000D_
_x000D_
_x000D_
Control Features_x000D_
- _x000D_
- TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation
- isolation plug permits disconnecting control circuits from all power sources.
_x000D_
_x000D_
_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_
- _x000D_
- IBC 2006 – Section 13, Occupancy Category IV
- ASCE7-05 Region 3 (minimum SS=342%)
_x000D_
_x000D_
_x000D_
Related products
