Thomson / Marathon 1200A TS870SE Auto Transfer Switch 3 PH 600V Max 3 Pole NEMA 1 Encl

• Additional detail in downloads tab below_x000D_
• Call us at 954-922-3800 to place your order

Brochure_x000D_
_x000D_
Controller brochure_x000D_
_x000D_
Quick start guide_x000D_
_x000D_
O&M manual_x000D_
_x000D_
Manual_x000D_
_x000D_
Specifications_x000D_
_x000D_
Schematic drawing_x000D_
_x000D_
Physical drawing_x000D_
_x000D_
 _x000D_
_x000D_
 _x000D_
_x000D_
 _x000D_
_x000D_
 Brochure_x000D_
_x000D_
Controller brochure_x000D_
_x000D_
Quick start guide_x000D_
_x000D_
O&M manual_x000D_
_x000D_
Manual_x000D_
_x000D_
Specifications_x000D_
_x000D_
Schematic drawing_x000D_
_x000D_
Physical drawing_x000D_
_x000D_
 _x000D_
_x000D_
 _x000D_
_x000D_
 _x000D_
_x000D_
 Brochure_x000D_
_x000D_
Controller brochure_x000D_
_x000D_
Quick start guide_x000D_
_x000D_
O&M manual_x000D_
_x000D_
Manual_x000D_
_x000D_
Specifications_x000D_
_x000D_
Schematic drawing_x000D_
_x000D_
Physical drawing_x000D_
_x000D_
 _x000D_
_x000D_
 _x000D_
_x000D_
 _x000D_
_x000D_
 Brochure_x000D_
_x000D_
Controller brochure_x000D_
_x000D_
Quick start guide_x000D_
_x000D_
O&M manual_x000D_
_x000D_
Manual_x000D_
_x000D_
Specifications_x000D_
_x000D_
Schematic drawing_x000D_
_x000D_
Physical drawing_x000D_
_x000D_
 _x000D_
_x000D_
 _x000D_
_x000D_
 _x000D_
_x000D_
 

Features

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

Amperage Range:	100A – 1200A
Voltage Range:	208 – 600V
Poles:	2, 3 or 4
Frequency:	50/60Hz
Power Distribution:	Single Phase, 3 wire or 3 Phase, 4 wire
Controller:	TSC 900
Standard Enclosure:	Nema 1
Safety Standard:	UL 1008 , CSA C22.2 No. 178
Quality Assurance:	ISO 9001 Registered
Warranty:	2 Year

_x000D_
 _x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_

_x000D_
• fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.

_x000D_

• 3 cycle short circuit current withstand

_x000D_

• completely separate utility and generator side power switching units.

_x000D_

• power switching units can incorporate over current protection, allowing cost savings in upstream devices.

_x000D_

• not damaged if manually switched while in service.

_x000D_

_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_

_x000D_
• heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.

_x000D_

• safe manual operation permits operation under adverse conditions.

_x000D_

_x000D_
Superior Serviceability_x000D_

_x000D_
• all mechanical and control devices are visible and readily accessible.

_x000D_

• all control wires and power busses are front-accessible.

_x000D_

_x000D_
Control Features_x000D_

_x000D_
• TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation

_x000D_

• isolation plug permits disconnecting control circuits from all power sources.

_x000D_

_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_

_x000D_
• IBC 2006 – Section 13, Occupancy Category IV

_x000D_

• ASCE7-05 Region 3 (minimum SS=342%)

_x000D_

_x000D_
 

Features

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

Amperage Range:	100A – 1200A
Voltage Range:	208 – 600V
Poles:	2, 3 or 4
Frequency:	50/60Hz
Power Distribution:	Single Phase, 3 wire or 3 Phase, 4 wire
Controller:	TSC 900
Standard Enclosure:	Nema 1
Safety Standard:	UL 1008 , CSA C22.2 No. 178
Quality Assurance:	ISO 9001 Registered
Warranty:	2 Year

_x000D_
 _x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_

_x000D_
• fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.

_x000D_

• 3 cycle short circuit current withstand

_x000D_

• completely separate utility and generator side power switching units.

_x000D_

• power switching units can incorporate over current protection, allowing cost savings in upstream devices.

_x000D_

• not damaged if manually switched while in service.

_x000D_

_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_

_x000D_
• heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.

_x000D_

• safe manual operation permits operation under adverse conditions.

_x000D_

_x000D_
Superior Serviceability_x000D_

_x000D_
• all mechanical and control devices are visible and readily accessible.

_x000D_

• all control wires and power busses are front-accessible.

_x000D_

_x000D_
Control Features_x000D_

_x000D_
• TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation

_x000D_

• isolation plug permits disconnecting control circuits from all power sources.

_x000D_

_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_

_x000D_
• IBC 2006 – Section 13, Occupancy Category IV

_x000D_

• ASCE7-05 Region 3 (minimum SS=342%)

_x000D_

_x000D_
 

Features

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

Amperage Range:	100A – 1200A
Voltage Range:	208 – 600V
Poles:	2, 3 or 4
Frequency:	50/60Hz
Power Distribution:	Single Phase, 3 wire or 3 Phase, 4 wire
Controller:	TSC 900
Standard Enclosure:	Nema 1
Safety Standard:	UL 1008 , CSA C22.2 No. 178
Quality Assurance:	ISO 9001 Registered
Warranty:	2 Year

_x000D_
 _x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_

_x000D_
• fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.

_x000D_

• 3 cycle short circuit current withstand

_x000D_

• completely separate utility and generator side power switching units.

_x000D_

• power switching units can incorporate over current protection, allowing cost savings in upstream devices.

_x000D_

• not damaged if manually switched while in service.

_x000D_

_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_

_x000D_
• heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.

_x000D_

• safe manual operation permits operation under adverse conditions.

_x000D_

_x000D_
Superior Serviceability_x000D_

_x000D_
• all mechanical and control devices are visible and readily accessible.

_x000D_

• all control wires and power busses are front-accessible.

_x000D_

_x000D_
Control Features_x000D_

_x000D_
• TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation

_x000D_

• isolation plug permits disconnecting control circuits from all power sources.

_x000D_

_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_

_x000D_
• IBC 2006 – Section 13, Occupancy Category IV

_x000D_

• ASCE7-05 Region 3 (minimum SS=342%)

_x000D_

_x000D_
 

Features

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

Amperage Range:	100A – 1200A
Voltage Range:	208 – 600V
Poles:	2, 3 or 4
Frequency:	50/60Hz
Power Distribution:	Single Phase, 3 wire or 3 Phase, 4 wire
Controller:	TSC 900
Standard Enclosure:	Nema 1
Safety Standard:	UL 1008 , CSA C22.2 No. 178
Quality Assurance:	ISO 9001 Registered
Warranty:	2 Year

_x000D_
 _x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_

_x000D_
• fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.

_x000D_

• 3 cycle short circuit current withstand

_x000D_

• completely separate utility and generator side power switching units.

_x000D_

• power switching units can incorporate over current protection, allowing cost savings in upstream devices.

_x000D_

• not damaged if manually switched while in service.

_x000D_

_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_

_x000D_
• heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.

_x000D_

• safe manual operation permits operation under adverse conditions.

_x000D_

_x000D_
Superior Serviceability_x000D_

_x000D_
• all mechanical and control devices are visible and readily accessible.

_x000D_

• all control wires and power busses are front-accessible.

_x000D_

_x000D_
Control Features_x000D_

_x000D_
• TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation

_x000D_

• isolation plug permits disconnecting control circuits from all power sources.

_x000D_

_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_

_x000D_
• IBC 2006 – Section 13, Occupancy Category IV

_x000D_

• ASCE7-05 Region 3 (minimum SS=342%)

_x000D_

_x000D_
 

Options

_x000D_
OPTIONAL FEATURES: (Specify separately from ATS MODEL CODE when ordering)_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

CODE	DESCRIPTIONS
AUX-G	Auxiliary Contact – Generator side (up to qty. 3)
AUX-U	Auxiliary Contact – Utility side (up to qty. 3)
CED	Custom Engineered Drawings – Project Specific
EAP1601	Transfer to Emergency Annunciator, Alarm Horn &Silence Pushbutton
FTS-4	4 Function Test Switch (Auto/Off/Engine Start/Test)
LCK	Enclosure Lockable Door
TS-H1	Enclosure Strip Heater c/w Thermostat (120VAC External Power Source Required)
TS-H2	Enclosure Strip Heater c/w Thermostat(internally powered from ATS load)
TS-O&M	Additional ATS O & M Manuals (Optional)
TS-STG	Shunt Trip Generator Switch
TS-STU	Shunt Trip Utility Switch
UPA	Utility Power Available Contact

_x000D_
 

Options

_x000D_
OPTIONAL FEATURES: (Specify separately from ATS MODEL CODE when ordering)_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

CODE	DESCRIPTIONS
AUX-G	Auxiliary Contact – Generator side (up to qty. 3)
AUX-U	Auxiliary Contact – Utility side (up to qty. 3)
CED	Custom Engineered Drawings – Project Specific
EAP1601	Transfer to Emergency Annunciator, Alarm Horn &Silence Pushbutton
FTS-4	4 Function Test Switch (Auto/Off/Engine Start/Test)
LCK	Enclosure Lockable Door
TS-H1	Enclosure Strip Heater c/w Thermostat (120VAC External Power Source Required)
TS-H2	Enclosure Strip Heater c/w Thermostat(internally powered from ATS load)
TS-O&M	Additional ATS O & M Manuals (Optional)
TS-STG	Shunt Trip Generator Switch
TS-STU	Shunt Trip Utility Switch
UPA	Utility Power Available Contact

_x000D_
 

Options

_x000D_
OPTIONAL FEATURES: (Specify separately from ATS MODEL CODE when ordering)_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

CODE	DESCRIPTIONS
AUX-G	Auxiliary Contact – Generator side (up to qty. 3)
AUX-U	Auxiliary Contact – Utility side (up to qty. 3)
CED	Custom Engineered Drawings – Project Specific
EAP1601	Transfer to Emergency Annunciator, Alarm Horn &Silence Pushbutton
FTS-4	4 Function Test Switch (Auto/Off/Engine Start/Test)
LCK	Enclosure Lockable Door
TS-H1	Enclosure Strip Heater c/w Thermostat (120VAC External Power Source Required)
TS-H2	Enclosure Strip Heater c/w Thermostat(internally powered from ATS load)
TS-O&M	Additional ATS O & M Manuals (Optional)
TS-STG	Shunt Trip Generator Switch
TS-STU	Shunt Trip Utility Switch
UPA	Utility Power Available Contact

_x000D_
 

Options

_x000D_
OPTIONAL FEATURES: (Specify separately from ATS MODEL CODE when ordering)_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

CODE	DESCRIPTIONS
AUX-G	Auxiliary Contact – Generator side (up to qty. 3)
AUX-U	Auxiliary Contact – Utility side (up to qty. 3)
CED	Custom Engineered Drawings – Project Specific
EAP1601	Transfer to Emergency Annunciator, Alarm Horn &Silence Pushbutton
FTS-4	4 Function Test Switch (Auto/Off/Engine Start/Test)
LCK	Enclosure Lockable Door
TS-H1	Enclosure Strip Heater c/w Thermostat (120VAC External Power Source Required)
TS-H2	Enclosure Strip Heater c/w Thermostat(internally powered from ATS load)
TS-O&M	Additional ATS O & M Manuals (Optional)
TS-STG	Shunt Trip Generator Switch
TS-STU	Shunt Trip Utility Switch
UPA	Utility Power Available Contact

_x000D_
 

_x000D_

_x000D_

_x000D_
_x000D_
You can finance a standby generator for your home at an affordable rate and reasonable monthly payments._x000D_
To apply please print and fill out the PDF below._x000D_
_x000D_
Download Application_x000D_
_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

You can finance a standby generator for up to $750,000 for your business an affordable rate and reasonable monthly payments._x000D_
Get fast approval by using our DirectCapital online application below.

_x000D_

Apply Online Here

_x000D_
_x000D_

_x000D_

_x000D_

_x000D_

_x000D_
_x000D_
You can finance a standby generator for your home at an affordable rate and reasonable monthly payments._x000D_
To apply please print and fill out the PDF below._x000D_
_x000D_
Download Application_x000D_
_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

You can finance a standby generator for up to $750,000 for your business an affordable rate and reasonable monthly payments._x000D_
Get fast approval by using our DirectCapital online application below.

_x000D_

Apply Online Here

_x000D_
_x000D_

_x000D_

_x000D_

_x000D_

_x000D_
_x000D_
You can finance a standby generator for your home at an affordable rate and reasonable monthly payments._x000D_
To apply please print and fill out the PDF below._x000D_
_x000D_
Download Application_x000D_
_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

You can finance a standby generator for up to $750,000 for your business an affordable rate and reasonable monthly payments._x000D_
Get fast approval by using our DirectCapital online application below.

_x000D_

Apply Online Here

_x000D_
_x000D_

_x000D_

_x000D_

_x000D_

_x000D_
_x000D_
You can finance a standby generator for your home at an affordable rate and reasonable monthly payments._x000D_
To apply please print and fill out the PDF below._x000D_
_x000D_
Download Application_x000D_
_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

You can finance a standby generator for up to $750,000 for your business an affordable rate and reasonable monthly payments._x000D_
Get fast approval by using our DirectCapital online application below.

_x000D_

Apply Online Here

_x000D_
_x000D_

_x000D_