Shop Our Products

Thomson / Marathon 100A TS870SE Auto Transfer Switch 1 PH 120/240V 2 Pole NEMA 4X 316 Encl

Model #: TS872A0100B1AD5LMKAA

OUR PRICE: Call for Price

In stock

• Additional detail in downloads tab below_x000D_
• Call us at 954-922-3800 to place your order

Compare

SKU: TS872A0100B1AD5LMKAA Category: Transfer Switches Tags: 100A, 120/240V Single Phase, 2 Pole, ATS, Automatic Transfer Switch, DD, Double Door, Marathon, NEMA 4X 316 Stainless Steel, SE Rated, Service Entrance, Thomson Technology

Description

Downloads

Features

Financing

• Additional detail in downloads tab below_x000D_
• Call us at 954-922-3800 to place your order

Specification sheet

Features

_x000D_

Amperage Range:	100A – 1200A
Voltage Range:	208 – 600V
Poles:	2, 3 or 4
Frequency:	50/60Hz
Power Distribution:	Single Phase, 3 wire or 3 Phase, 4 wire
Controller:	TSC 900
Standard Enclosure:	Nema 1
Safety Standard:	UL 1008 , CSA C22.2 No. 178
Quality Assurance:	ISO 9001 Registered
Warranty:	2 Year

_x000D_
_x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_

fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.

_x000D_

3 cycle short circuit current withstand

_x000D_

completely separate utility and generator side power switching units.

_x000D_

power switching units can incorporate over current protection, allowing cost savings in upstream devices.

_x000D_

not damaged if manually switched while in service.

_x000D_

_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_

heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.

_x000D_

safe manual operation permits operation under adverse conditions.

_x000D_

_x000D_
Superior Serviceability_x000D_

all mechanical and control devices are visible and readily accessible.

_x000D_

all control wires and power busses are front-accessible.

_x000D_

_x000D_
Control Features_x000D_

TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation

_x000D_

isolation plug permits disconnecting control circuits from all power sources.

_x000D_

_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_

IBC 2006 – Section 13, Occupancy Category IV

_x000D_

ASCE7-05 Region 3 (minimum SS=342%)

_x000D_

Features

_x000D_

Amperage Range:	100A – 1200A
Voltage Range:	208 – 600V
Poles:	2, 3 or 4
Frequency:	50/60Hz
Power Distribution:	Single Phase, 3 wire or 3 Phase, 4 wire
Controller:	TSC 900
Standard Enclosure:	Nema 1
Safety Standard:	UL 1008 , CSA C22.2 No. 178
Quality Assurance:	ISO 9001 Registered
Warranty:	2 Year

_x000D_
_x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_

fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.

_x000D_

3 cycle short circuit current withstand

_x000D_

completely separate utility and generator side power switching units.

_x000D_

power switching units can incorporate over current protection, allowing cost savings in upstream devices.

_x000D_

not damaged if manually switched while in service.

_x000D_

_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_

heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.

_x000D_

safe manual operation permits operation under adverse conditions.

_x000D_

_x000D_
Superior Serviceability_x000D_

all mechanical and control devices are visible and readily accessible.

_x000D_

all control wires and power busses are front-accessible.

_x000D_

_x000D_
Control Features_x000D_

TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation

_x000D_

isolation plug permits disconnecting control circuits from all power sources.

_x000D_

_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_

IBC 2006 – Section 13, Occupancy Category IV

_x000D_

ASCE7-05 Region 3 (minimum SS=342%)

_x000D_

Features

_x000D_

Amperage Range:	100A – 1200A
Voltage Range:	208 – 600V
Poles:	2, 3 or 4
Frequency:	50/60Hz
Power Distribution:	Single Phase, 3 wire or 3 Phase, 4 wire
Controller:	TSC 900
Standard Enclosure:	Nema 1
Safety Standard:	UL 1008 , CSA C22.2 No. 178
Quality Assurance:	ISO 9001 Registered
Warranty:	2 Year

_x000D_
_x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_

fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.

_x000D_

3 cycle short circuit current withstand

_x000D_

completely separate utility and generator side power switching units.

_x000D_

power switching units can incorporate over current protection, allowing cost savings in upstream devices.

_x000D_

not damaged if manually switched while in service.

_x000D_

_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_

heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.

_x000D_

safe manual operation permits operation under adverse conditions.

_x000D_

_x000D_
Superior Serviceability_x000D_

all mechanical and control devices are visible and readily accessible.

_x000D_

all control wires and power busses are front-accessible.

_x000D_

_x000D_
Control Features_x000D_

TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation

_x000D_

isolation plug permits disconnecting control circuits from all power sources.

_x000D_

_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_

IBC 2006 – Section 13, Occupancy Category IV

_x000D_

ASCE7-05 Region 3 (minimum SS=342%)

_x000D_

Features

_x000D_

Amperage Range:	100A – 1200A
Voltage Range:	208 – 600V
Poles:	2, 3 or 4
Frequency:	50/60Hz
Power Distribution:	Single Phase, 3 wire or 3 Phase, 4 wire
Controller:	TSC 900
Standard Enclosure:	Nema 1
Safety Standard:	UL 1008 , CSA C22.2 No. 178
Quality Assurance:	ISO 9001 Registered
Warranty:	2 Year

_x000D_
_x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_

fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.

_x000D_

3 cycle short circuit current withstand

_x000D_

completely separate utility and generator side power switching units.

_x000D_

power switching units can incorporate over current protection, allowing cost savings in upstream devices.

_x000D_

not damaged if manually switched while in service.

_x000D_

_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_

heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.

_x000D_

safe manual operation permits operation under adverse conditions.

_x000D_

_x000D_
Superior Serviceability_x000D_

all mechanical and control devices are visible and readily accessible.

_x000D_

all control wires and power busses are front-accessible.

_x000D_

_x000D_
Control Features_x000D_

TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation

_x000D_

isolation plug permits disconnecting control circuits from all power sources.

_x000D_

_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_

IBC 2006 – Section 13, Occupancy Category IV

_x000D_

ASCE7-05 Region 3 (minimum SS=342%)

_x000D_

Features

_x000D_

Amperage Range:	100A – 1200A
Voltage Range:	208 – 600V
Poles:	2, 3 or 4
Frequency:	50/60Hz
Power Distribution:	Single Phase, 3 wire or 3 Phase, 4 wire
Controller:	TSC 900
Standard Enclosure:	Nema 1
Safety Standard:	UL 1008 , CSA C22.2 No. 178
Quality Assurance:	ISO 9001 Registered
Warranty:	2 Year

_x000D_
_x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_

fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.

_x000D_

3 cycle short circuit current withstand

_x000D_

completely separate utility and generator side power switching units.

_x000D_

power switching units can incorporate over current protection, allowing cost savings in upstream devices.

_x000D_

not damaged if manually switched while in service.

_x000D_

_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_

heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.

_x000D_

safe manual operation permits operation under adverse conditions.

_x000D_

_x000D_
Superior Serviceability_x000D_

all mechanical and control devices are visible and readily accessible.

_x000D_

all control wires and power busses are front-accessible.

_x000D_

_x000D_
Control Features_x000D_

TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation

_x000D_

isolation plug permits disconnecting control circuits from all power sources.

_x000D_

_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_

IBC 2006 – Section 13, Occupancy Category IV

_x000D_

ASCE7-05 Region 3 (minimum SS=342%)

_x000D_

Features

_x000D_

Amperage Range:	100A – 1200A
Voltage Range:	208 – 600V
Poles:	2, 3 or 4
Frequency:	50/60Hz
Power Distribution:	Single Phase, 3 wire or 3 Phase, 4 wire
Controller:	TSC 900
Standard Enclosure:	Nema 1
Safety Standard:	UL 1008 , CSA C22.2 No. 178
Quality Assurance:	ISO 9001 Registered
Warranty:	2 Year

_x000D_
_x000D_
_x000D_
Thomson Power Systems TS 870 Automatic Transfer Switches offer the following outstanding features:_x000D_
_x000D_
Enclosed Contact Power Switching Units_x000D_

fully enclosed silver alloy contacts provide high withstand rating & 100% continuous current rating.

_x000D_

3 cycle short circuit current withstand

_x000D_

completely separate utility and generator side power switching units.

_x000D_

power switching units can incorporate over current protection, allowing cost savings in upstream devices.

_x000D_

not damaged if manually switched while in service.

_x000D_

_x000D_
Reliable Motor-Operated Transfer Mechanism_x000D_

heavy duty brushless gearmotor and operating mechanism provide mechanical interlocking and extreme long life.

_x000D_

safe manual operation permits operation under adverse conditions.

_x000D_

_x000D_
Superior Serviceability_x000D_

all mechanical and control devices are visible and readily accessible.

_x000D_

all control wires and power busses are front-accessible.

_x000D_

_x000D_
Control Features_x000D_

TSC 900 microprocessor based controller with a 7” touch-screen operator interface for easy viewing and operation

_x000D_

isolation plug permits disconnecting control circuits from all power sources.

_x000D_

_x000D_
Seismic Certification: TS 870 ATS is certified for installation and operation per the following requirements:_x000D_

IBC 2006 – Section 13, Occupancy Category IV

_x000D_

ASCE7-05 Region 3 (minimum SS=342%)

_x000D_

HOMEOWNER FINANCING:

_x000D_

_x000D_
_x000D_
You can finance a standby generator for your home at an affordable rate and reasonable monthly payments._x000D_
To apply please print and fill out the PDF below._x000D_
_x000D_
Download Application_x000D_
_x000D_

_x000D_

BUSINESS FINANCING:

_x000D_

You can finance a standby generator for up to $750,000 for your business an affordable rate and reasonable monthly payments._x000D_
Get fast approval by using our DirectCapital online application below.

_x000D_

Apply Online Here

_x000D_
_x000D_

_x000D_

Description

Description

• Additional detail in downloads tab below_x000D_
• Call us at 954-922-3800 to place your order

Thomson / Marathon 100A TS870SE Auto Transfer Switch 1 PH 120/240V 2 Pole NEMA 4X 316 Encl

Features

Features

Features

Features

Features

Features

HOMEOWNER FINANCING:

BUSINESS FINANCING:

HOMEOWNER FINANCING:

BUSINESS FINANCING:

HOMEOWNER FINANCING:

BUSINESS FINANCING:

HOMEOWNER FINANCING:

BUSINESS FINANCING:

HOMEOWNER FINANCING:

BUSINESS FINANCING:

HOMEOWNER FINANCING:

BUSINESS FINANCING:

Description

Thomson / Marathon 400A TS840 Auto Transfer Switch 1 PH 120/240V 2 Pole NEMA 3R Encl

Thomson / Marathon 400A TS840SE Auto Transfer Switch 3 PH 120/208/240V 3 Pole NEMA 3R Encl

Thomson / Marathon 400A TS843 Auto Transfer Switch 3 PH 120/208/240V 3 Pole NEMA 3R Encl

Thomson / Marathon 200A TS840SE Auto Transfer Switch 3 PH 120/208V 3 Pole NEMA 3R Encl

Services

Shop

Company

Email Newsletter

Thomson / Marathon 100A TS870SE Auto Transfer Switch 1 PH 120/240V 2 Pole NEMA 4X 316 Encl

Features

Features

Features

Features

Features

Features

HOMEOWNER FINANCING:

BUSINESS FINANCING:

HOMEOWNER FINANCING:

BUSINESS FINANCING:

HOMEOWNER FINANCING:

BUSINESS FINANCING:

HOMEOWNER FINANCING:

BUSINESS FINANCING:

HOMEOWNER FINANCING:

BUSINESS FINANCING:

HOMEOWNER FINANCING:

BUSINESS FINANCING:

Description

Related products

Thomson / Marathon 400A TS840 Auto Transfer Switch 1 PH 120/240V 2 Pole NEMA 3R Encl

Thomson / Marathon 400A TS840SE Auto Transfer Switch 3 PH 120/208/240V 3 Pole NEMA 3R Encl

Thomson / Marathon 400A TS843 Auto Transfer Switch 3 PH 120/208/240V 3 Pole NEMA 3R Encl

Thomson / Marathon 200A TS840SE Auto Transfer Switch 3 PH 120/208V 3 Pole NEMA 3R Encl

Services

Shop

Company

Email Newsletter